This page is about applying a 2-part epoxy coating to concrete basement floors, the costs involved and the factors that affect these costs. This is totally different than if you were assessing the ...

This involves acid etching and one coat of epoxy. It is an affordable way to spruce up an old garage floor, but the coating won’t last long. After acid-etching, two coats of two-part epoxy are ...

Description: Thermalbond™ is a thermally conductive, high strength epoxy adhesive. Green in color, it provides exceptional adhesion to copper, aluminum, steel, glass, ceramics and most plastics.

That basic slab of concrete in your garage is a stain and scuff magnet. Here are products in the running for the best epoxy ...

About 10 years ago, I used a two-part epoxy and then painted it with garage floor paint, but I am getting divots. Do you have ...

SUPER-STRENTH FLOOR COATING - USANNEX Garage Floor Epoxy is an industrial grade, heavy-duty epoxy coating and sealer for high-traffic garage floors. It provides an abrasion-resistant surface that ...

Many epoxy coatings have a mix ratio of 1:1, which means one part by volume of Part A (the epoxy resin) to one part by volume of Part B (the curing agent). However, mix ratios of 2:1, 3:1 and 4:1 ...

Floor coatings can also be used to: brighten or define areas of facilities mark traffic aisles route traffic cover stained concrete A floor coating such as epoxy is suitable for resurfacing ...

He fastened a patch for the hole from some epoxy glue; Araldite is the brand he used, but any two-part epoxy, like JB Weld, should work. One side of the hole was covered with tape and the epoxy ...

Play sand, gravel, dye (in the form of iron oxide and liquid epoxy dye), and two-part epoxy were used to create seven different samples. Samples using rock didn’t turn out that great and still ...

It’s common advice that paint is one of the cheapest and easiest ... Follow up by applying a two-part epoxy putty to chips or cracks in the countertops. Once the putty is dry, use 150-grit ...

Normally these floors have been covered with another surface such as tile, carpet, paint or epoxy. If the material and old adhesive are not removed properly, the final floor can be affected with ...